Aqua-Traxx® and Tape Fittings
Tape Joiner
Used for joining or repairing tape lines.
Available in 16mm or 22mm
Tape Tee
Used for connecting tape to tape to tape
Lateral Tube to Tap Joiner
Used for joining tape to poly pipe.
Tape to Female Tee
Used for joining Tape to Female BSP Tee
Tape x 13mm Barbed Joiner
Used for joining tape to 13mm poly pipe
25mm BSPF x Tape Tee
Used to connect tape lines to male threaded riser
Tape x 10mm Barbed Joiner
Used for joining tape to 10mm poly pipe
Tape x 10mm Compression Joiner
Used for connecting tape to Durapol. Use 5mm punch
20mm MBSP x Tape Director
Used for connecting the tape to valves or female threaded fittings
Available in 16mm or 22mm
16mm Barb x Tape In-Line Tap
Used to turn off supply to tape lines. Used when connected to poly tube
End Plug
Used to seal the ends of driplines
Flush & Drain Valve x 16mm Tape
Closing Pressure 5.5 kPa
Vent Valve End Flushing Valve
Used to expel air on start up, introduce air on shut down.
One Stage Layflat Adaptor
Used for connecting Aqua-Traxx tape to Lay-Flat tubing (19mm diameter hole required)
Tape Joiner
Used for joining or repairing tape lines.
Available in 16mm or 22mm
Tape Tee
Used for connecting tape to tape to tape
Lateral Tube to Tap Joiner
Used for joining tape to poly pipe.
Tape to Female Tee
Used for joining Tape to Female BSP Tee
Tape x 13mm Barbed Joiner
Used for joining tape to 13mm poly pipe
25mm BSPF x Tape Tee
Used to connect tape lines to male threaded riser
Tape x 10mm Barbed Joiner
Used for joining tape to 10mm poly pipe
Tape x 10mm Compression Joiner
Used for connecting tape to Durapol. Use 5mm punch
20mm MBSP x Tape Director
Used for connecting the tape to valves or female threaded fittings
Available in 16mm or 22mm
16mm Barb x Tape In-Line Tap
Used to turn off supply to tape lines. Used when connected to poly tube
End Plug
Used to seal the ends of driplines
Flush & Drain Valve x 16mm Tape
Closing Pressure 5.5 kPa
Vent Valve End Flushing Valve
Used to expel air on start up, introduce air on shut down.
One Stage Layflat Adaptor
Used for connecting Aqua-Traxx tape to Lay-Flat tubing (19mm diameter hole required)
Click the Link below to find out more
userfiles/file/Spec Sheet Aquatraxx Fittings.pdf