Drip Eze Landscape Tubing

APPLICATION

Drip Eze™ extruded in-line drip tube is a precise, low flow irrigation product suited for awide range of landscape applications, such as high density planting areas and intricately shaped beds.

Drip Eze™ applies water to the plants at a slow consistent rate, reducing the risk of run-off and water wastage.  Particularly suited to areas like median strip garden beds where overspray cannot be tolerated.

FEATURES

·          The tube is manufactured from low density polyethylene.

·          Continuous wetted strip (in closer spacings).

·          Pressure compensating emitter is available in 13mm only.

·          Discreet brown tubing blends into the landscape.

·          Easy to install, fits difficult corners, rockeries, etc.

·          Two directly opposed outlet holes to prevent exit holes clogging.

·          Uses Australian Standard poly fittings.

·          Designed to be installed above ground.

·          Raised inlet to emitter reduces the risk of emitter blockage.

DRIP EZE™ 4MM NON-COMPENSATING

·          Tube I/D:                                                  4mm

·          Tube O/D                                 6mm

·          Emitter discharge:                                   2Lph @ 100 kPa

·          Emitter spacing:                                       15, 30 cm

·          Recommended operating pressure:        100 kPa

·          Tube pressure rating:                             300 kPa

·          Roll lengths (15cm):                                914m

·          Roll lengths (30cm):                                25, 50, 100, 200m

·          Colour:                                                     Brown

DRIP EZE™ 13MM NON-COMPENSATING

·          Tube I/D:                                                  12.9mm

·          Tube O/D:                                                15.4mm

·          Emitter Discharge:                                   2 Lph @ 100 kPa

·          Emitter Spacing:                                      30, 40, 50, 60, 100 cm

·          Recommended Operating Pressure:       100 kPa

·          Tube Pressure Rating:                            30 kPa

·          Roll Lengths (40, 50, 60, 100cm):           200m

·          Roll Lenths (30cm):                 20, 50, 100, 200m

·          Colour:                                                     Brown

DRIP EZE™ 13MM PRESSURE COMPENSATING

·          Tube I/D:                                                  12.9mm

·          Tube O/D:                                                15.4mm

·          Emitter Discharge:                                   1.6 & 2 Lph

·          Emitter Spacing (1.6 Lph):                       40cm

·          Emitter Spacing (2 Lph):                          20, 30, 40, 50, 60, 100cm

·          Recommended Operating Pressure:       100-300 kPa

·          Tube Pressure Rating:                            300 kPa

·          Roll Lengths (1.6 Lph, 40cm): 50, 100, 200m

·          Roll Lengths (2 Lph):                               20cm – 200m

30cm – 20, 50, 100, 200m

40cm – 50, 100, 200m

50cm – 200m

60cm – 200m

100cm – 200m

·          Colour:                                                     Brown

 userfiles/file/Spec Sheet Drip Eze.pdf