Irritrol Total Control R Series Controller

Irritrol Total Control R Series Controller

Maximum scheduling flexibility in an easy-to-use format makes this innovative controller ideal for a wide range of sophisticated watering requirements.

KEY FEATURES & BENEFITS

·          New “R” models are remote ready – compatible with Toro TMR-1-KIT maintenance remote.

·          Four independent programs offer concurrent operation capability-for scheduling flexibility.

·          Seven-day calendar, odd/even day or day-interval options of one to 30 days – provides the flexibility to meet water restrictions or plant water requirements.

·          Programmable master valve on/off per program.  Provides the flexibility of running some programs with a booster pump and some without.

·          Non-volatile memory.  Holds program during power failures for reliable operation.

·          Snap-out design.  Allows for easy removal of control module without disturbing valve wiring for hassle-free station upgrade and servicing.

·          Flexible station run times and start times.  Meets a broad range of watering requirements.

·          Sensor hooked up with bypass switch compatible with the wireless Rainsensor™ series.  Saves water by shutting off the system during rain.

ADDED FEATURES

·          User-friendly, 10-position programming dial and large, easy-to-read display.

·          Excluded-day option, when used with the odd/even day option, allows selection of specific day(s) not to water.

·          365-day calendar for odd/even day programming.

·          Start time stacking within each program.

·          Water budgeting.

·          Programmable “Rain Off” up to seven days.

·          Automatic, semi-automatic, manual and timed-manual operation.

·          Self-diagnostic circuit breaker identifies and overrides an electrical malfunction on a valve.

·          Electrical surge protection (on both input and output lines) resists damage from lightning storms and power outages.

·          Battery backup keeps accurate time for up to 90 days during power failures.

·          Valve test terminal for easy valve identification.

·          Weather-resistant, plastic key-lock cabinet with an internal transformer.

·          Wall mounted.

·          Complies with Australian electrical safety standards; C Tick approved.

OPERATING SPECIFICATIONS

·         Station run times:                          1 minute to 10 hours in 1-minute increments.

·         Start times:                                    16 Total starts assignable to any program.

·         Watering schedule:                       7-day calendar, odd/even day or interval option of 1-30 days.

·         Watering budgeting:                      10-200% in 10% increments.

ELECTRICAL SPECIFICATIONS

·         Electrical circuit breaker:              1.25 amps minimum holding.

·         Maximum output per station:         24 VAC, 0.5 amps.

·         Maximum output to valves:           24 VAC, 1.25 amps (including master valve).

·         Battery backup:                            9-volt alkaline battery (not included).

·         Transformer input:                        240 VAC, 50 Hz.

·         Transformer output:                      24 VAC, 1.67 amps.

5 Year Warranty