King Waterproof Connector - Blue Large
· UL 486D Listed.
· One-Step® Installation.
· Corrosion Proof.
Rated for all underground direct bury applications.
For use in damp, wet, raintight, direct bury and submersible locations. Not to be used in continuous submersion applications.
INSTALLATION INSTRUCTIONS
IMPORTANT: Turn off the power before installing or removing the connector. Product must be used in accordance with local and national codes.
1. Strip wires 5/8” (15.9mm).
2. Align any frayed strands or conductors.
3. Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5. Wipe sealant in and around conductors and connector opening while tightening. Do not reuse.
PRODUCT SPECIFICATIONS & MEASUREMENTS
Max. Voltage: 600V max. building wire
(1000V max, signs or luminaries)
Connector Size: 2” x 13/16”
Wire Type: Copper/Copper
Wire Range: Min #22/Max #8
Temperature Rating: 105° C (221°F)
Silicone Sealant Temp: -45°F to 400°F
UL Designation: MDB