Skip to content
Free shipping on your first order* Apply Discount
Free shipping on your first order* Apply Discount
Irritrol 2500 Series Solenoid Valve with Flow Control, 25mm/1" BSP Thread Inlet ( AC Coil )

Irritrol 2500 Series Solenoid Valve with Flow Control, 25mm/1" BSP Thread Inlet ( AC Coil )

SKU 2500MTF
$0.00 - $0.00
$65.95
$57.66 - $65.95
$65.95
Excl. GST
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Irritrol 2500 series Solenoid Valve with AC Coil, Flow Control Feature, 25mm/1" BSP Thread Inlet.

  • Designed primarily for light commercial and residential use.
  • Patented "Floating Metering System" for consistent performance in dirty water applications (debris resistance). 
  • Double-beaded, chloramine and ozone-resistant santoprene diaphragm
  • Heavy Duty Corrosion-free PVC, Glass-Filled Nylon and Stainless Steel construction for longer life span
  • Self-aligning bonnet with captured Hex Phillips screws for easy and efficient servicing
  • Flow rate 0.95 - 113.5l/m
  • Available with or without flow control
  • Operating pressure 0.69-10.34bar
  • 5 year warranty. 
 Specifications  
Flow Range .25-30GPM
Holding Current .2amp
Holding Volt-Amp 24V ac-4.8 VA
Inrush Current .4amp
Inrush Volt-Amp 24V ac-9.6 VA
Solenoid 24V ac
 Documentations 

 Irritrol 2500 Series Solenoid Valve (Metric)

 Irritrol 2500 Series Solenoid Valve (Imperial)

 Irritrol 2500 Series Solenoid Valve Installation Instructions 

 Videos  

 

 Compatible with 

Manifold Fittings 

The Irritrol 2500 Valves are compatible with all 25mm male Dura Manifold Fittings. (Click here to view)

Lateral Pipe Directors

The Irritrol 2500 Valves are compatible with the 25mm Threaded Male Directors. (Click here to view)

Swing Joints 

The Irritrol 2500 valves are able to be installed in a VUH (Valve Under Head) configuration, this basically means that the valve is connected directedly to the sprinkler using a swing joint. Irritrol 2500 valves are only combatable with 25mm swing joints. (Click here to view) 

 

 Reviews  

 

FAQ's

What does a solenoid valve do in an irrigation system?

A solenoid valve acts like a switch for water flow in irrigation. When activated by an irrigation controller, it opens an internal passage, allowing water to flow to a specific zone (sprinklers, drip system) and closes when shut off by the controller, stopping water flow.

What is a solenoid valve diaphragm used for?

In a solenoid valve, the diaphragm is a crucial component that acts as a barrier between the control mechanism (electrical coil) and the fluid being controlled (water, air, etc.). It has two main functions:

Sealing: The diaphragm separates the pressurised fluid from the electrical components of the valve. This prevents water damage to the coil and ensures a safe electrical operation.

Controlling Flow: The diaphragm moves based on the energising or de-energising of the solenoid coil. When energised, the coil creates a magnetic field that pulls the diaphragm open, allowing fluid to flow through the valve. Conversely, when de-energised, the magnetic field collapses, and a spring or fluid pressure pushes the diaphragm back to its closed position, stopping the flow.

Free Shipping

When you spend $250+*

Give Us A Call

09 415 0300

35 YEARS

NZ Owned & Operated

NATIONWIDE SERVICING

Experienced Irrigation Technicians