Skip to content
Free shipping on your first order* Apply Discount
Free shipping on your first order* Apply Discount
Irritrol 200B Series Solenoid Valve with Flow Control Feature ( DC Coil )

Irritrol 200B Series Solenoid Valve with Flow Control Feature ( DC Coil )

SKU 216B-M-DC
$0.00 - $0.00
$277.43
$241.50 - $277.43
$277.43
Excl. GST
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Irritrol 200B Series Solenoid Valve with DC Coil and Flow Control Feature.

These durable, heavy-duty commercial valves offer a selection of key features designed to provide reliable, cost-effective performance under the most challenging conditions.

  • Heavy-duty corrosion and UV-resistant PVC construction with stainless steel spring and hardware
  • Rugged, bouble-beaded santoprenen diaphragm
  • Captive solenoid plunger
  • Flow control allows flow adjustment and manual shut-off
  • Accepts omnireg pressure regulator
  • Flow rate 18.9-454.2l/m
  • Operating pressure 1.4-10.3bar
  • 5 years warranty.
 Specifications 
Flow Range
40 mm 80 to 300l/m
50 mm 225 to 450l/m Consult your irrigation designer before using any solenoid valve where flow velocities exceed 2m/s
Pressure Range 140–1034kPa Maximum pressure of 800 kPa if using latching coil (DCL)
Solenoid 24 VDC
Inrush volt-amp 24 VDC – 9.6 VDC
Inrush current 0.4amp
Holding volt-amp 24 VDC–4.8 VDC
 Documentations 

 Irritrol 200B Series Solenoid Valve Data sheet (Metric)

 Irritrol 200B Series Solenoid Valve Data sheet (Imperial) 


 Videos  

 No Video Available 

 Compatible with 

Replacement Diaphragm
We also offer replacement diaphragms in case yours wears out. (Click here to view)

MDPE Fittings
The 200B series valves are compatible with any male threaded MDPE fittings of the appropriate size (Click here to view)

Threaded fittings
The 200B series valves are compatible with any male threaded fittings of the appropriate size. (Click here to view)

Irritrol OMNIREG Series Pressure Regulator
The 200B series valves are compatible with The OMNIREG series Pressure regulators. (Click here to view)

Multi wire controllers (AC Solenoid ONLY)
The 200B series valves are compatible with all of our multi wire controls as long as they are equipped with a AC Solenoid. (Click here to view)

Battery Operated Controllers (DC Solenoid ONLY)
The 200B series valves are compatible with all of our battery operated controllers as long as they are equipped with a DC Solenoid. (Click here to view)

 Reviews  

 

FAQ's

What does a solenoid valve do in an irrigation system?

A solenoid valve acts like a switch for water flow in irrigation. When activated by an irrigation controller, it opens an internal passage, allowing water to flow to a specific zone (sprinklers, drip system) and closes when shut off by the controller, stopping water flow.

What is a solenoid valve diaphragm used for?

In a solenoid valve, the diaphragm is a crucial component that acts as a barrier between the control mechanism (electrical coil) and the fluid being controlled (water, air, etc.). It has two main functions:

Sealing: The diaphragm separates the pressurised fluid from the electrical components of the valve. This prevents water damage to the coil and ensures a safe electrical operation.

Controlling Flow: The diaphragm moves based on the energising or de-energising of the solenoid coil. When energised, the coil creates a magnetic field that pulls the diaphragm open, allowing fluid to flow through the valve. Conversely, when de-energised, the magnetic field collapses, and a spring or fluid pressure pushes the diaphragm back to its closed position, stopping the flow.

Free Shipping

When you spend $250+*

Give Us A Call

09 415 0300

35 YEARS

NZ Owned & Operated

NATIONWIDE SERVICING

Experienced Irrigation Technicians